T.A.G. +/HP wet low-pressure blasting unit, complete anti-graffiti set, 24 litre capacity, 0.5 to 6 bar blasting pressure, with integrated water tank, compressor and refrigerated dryer, optionally with 165 bar pressure washer
Tax-free EU delivery after VAT ID verification at checkout
Free delivery within Germany on orders over €99
| SKU :
S 475
T.A.G. +/HP wet low-pressure blasting unit, complete anti-graffiti set, 24 litre capacity, 0.5 to 6 bar blasting pressure, with integrated water tank, compressor and refrigerated dryer, optionally with 165 bar pressure washer - T.A.G. + est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Questions et aide
Questions et aide
Affichez des informations générales sur le produit ou des informations spécifiques sur le produit à l'aide de métachamps.
Leasing & Hire Purchase
Leasing & Hire Purchase
We offer the financing options leasing and hire purchase exclusively to businesses, commercial operators and self-employed persons for selected products with a net order value of €1,000 or more. Below you will find the key differences between the two forms of financing.
Leasing
With leasing, the product is made available to the lessee for use in return for regular lease payments. The asset is recognized on the lessor’s balance sheet. Lease payments can generally be claimed as operating expenses for tax purposes. These are gross payments, and VAT is charged throughout the entire term. Once the agreed minimum lease term has expired, purchasing the product is generally possible.
Hire purchase
In economic terms, hire purchase is equivalent to an installment purchase. The product is capitalized on the hire purchaser’s balance sheet and depreciated in accordance with the official depreciation tables. Ownership of the asset transfers to the hire purchaser upon payment of the final hire-purchase installment. VAT must be paid in full with the first hire-purchase installment (a pass-through item).
Shipping & Delivery
Shipping & Delivery
We ship our goods either via parcel service or via a freight forwarding company, depending on their size, weight and characteristics. We select the shipping method at our reasonable discretion.
The delivery times stated in the online shop are non-binding estimates, unless a binding delivery date has been expressly agreed in writing. They are based on the information available from our manufacturers, suppliers and logistics partners at the time the order is placed.
A large proportion of the products offered are shipped directly from the manufacturer or from external central warehouses (direct shipment). As a result, delivery times may differ from the stated guidelines. In particular, material shortages, production delays, supply bottlenecks, force majeure or other circumstances for which we are not responsible may result in delivery delays.
Disclaimer:
We accept no liability for delivery delays resulting from circumstances beyond our control. This applies in particular to delays caused by manufacturers, upstream suppliers, transport companies or other third parties. Liability for any resulting damages, in particular indirect damages, consequential damages or loss of profit, is excluded to the extent permitted by law.
Partial deliveries are permitted insofar as they are reasonable for the customer. They will not result in additional shipping costs unless otherwise agreed.
The exact delivery time for an item can be provided individually on request, either before or after placing the order.
Please contact us by telephone at +49 (0)2551 5030 or by email at shipping@strahltechnik-express.de.
If significant delivery delays occur, we will inform the customer without undue delay. Mandatory statutory rights of the customer remain unaffected.
| SKU :
S 475
T.A.G. +/HP wet low-pressure blasting unit, complete anti-graffiti set, 24 litre capacity, 0.5 to 6 bar blasting pressure, with integrated water tank, compressor and refrigerated dryer, optionally with 165 bar pressure washer - T.A.G. + est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
ACF T.A.G. + / T.A.G. + HP – professional complete anti-graffiti system for mobile aéro- and hydrogommage
The ACF T.A.G. + and the enhanced T.A.G. + HP are fully equipped, mobile complete systems for the professional removal of graffiti, paint coatings and stubborn dirt. The system was developed for municipalities, building cleaners, restoration companies, construction companies and specialised cleaning service providers that regularly work at changing locations and require a largely autonomous solution.
All essential components are combined on a compact transport platform: an ACF SL 28 Hydro low-pressure blasting machine with a 24-litre abrasive container, a powerful petrol compressor with 1,900 l/min, an integrated compressed-air cooling system, a 200-litre water tank, 10 metres of blast and supply line, and a 5 mm hydrogommage nozzle. The T.A.G. + HP additionally includes a mobile pressure washer that can be used independently of the blasting machine.
This combination allows the system to be transported quickly on a trailer or in a suitable commercial vehicle. At the worksite, the individual components can be removed from the platform and brought closer to the surface being treated as needed. This makes the system particularly suitable for work in public spaces, on façades, monuments, walls, bridges, underpasses, railway stations, schools and other graffiti-affected structures.
Your benefits at a glance
✅ Aéro- and hydrogommage with finely adjustable working pressure
✅ 24-litre abrasive capacity
✅ Integrated petrol compressor with 1,900 l/min
✅ Integrated compressed-air cooling to reduce moisture
✅ Large 200-litre water tank for largely autonomous operation
✅ 10 metres of blast and supply hose
✅ 5 mm hydrogommage nozzle for low-dust operation
✅ Suitable for stone, concrete, brick, metal, wood and many other substrates
✅ Removable, mobile components for hard-to-reach work areas
✅ T.A.G. + HP additionally includes an independently usable pressure washer
✅ Developed and manufactured by ACF France
📦 Scope of delivery T.A.G. +
✔ 24-litre abrasive container
✔ Integrated compressed-air cooler up to 2,000 l/min
✔ Petrol-powered compressor with 1,900 l/min
✔ 200-litre water tank
✔ 10 metres of blast and supply hose
✔ 5 mm hydrogommage nozzle
✔ Mobile platform and transport system
✔ Blast helmet or protective system according to the selected equipment
📦 Additional equipment T.A.G. + HP
✔ Working pressure up to 165 bar
✔ Water flow rate up to 11 l/min
✔ Petrol engine with 5.5 hp
✔ Hose reel with 20-metre high-pressure hose
✔ High-pressure lance
The exact scope of delivery depends on the selected variant and the specific quotation. Accessories, blasting media, personal protective equipment and transport equipment may vary depending on the configuration.
Technical data
| Feature | Value |
|---|---|
| Models | T.A.G. + / T.A.G. + HP |
| Blasting unit | ACF SL 28 Hydro |
| Blasting-media vessel | 24 litres |
| Working pressure | adjustable, approx. 0.5 to 7 bar |
| Compressor | Petrol engine, 1,900 l/min |
| Compressed-air treatment | Integrated air cooler up to 2,000 l/min |
| Water tank | 200 litres |
| Nozzle | Hydrogommage nozzle Ø 5 mm |
| Hose length | 10 metres |
| Dimensions | approx. 1,700 × 1,200 × 980 mm |
| Operating weight | approx. 545 kg |
| T.A.G. + HP high-pressure cleaner | 165 bar, 11 l/min |
| High-pressure hose | 20 metres on hose reel |
How the ACF T.A.G. + works
During Aérogommage, fine blasting media is accelerated with compressed air and directed in a controlled manner onto the surface to be cleaned. Compared with conventional high-pressure sandblasting, the system operates at a significantly lower, finely adjustable pressure. This allows the cleaning effect to be precisely matched to the substrate and the existing coating.
For Hydrogommage, a fine water mist is additionally mixed in at the nozzle. This binds a large proportion of the dust generated directly in the blasting area. At the same time, it reduces the rebound of blasting media. The process is therefore particularly suitable for work in urban areas, on buildings, on listed surfaces and wherever dust generation should be kept as low as possible.
Adding water does not replace the proper securing of the work area. Wastewater, dissolved coatings and used blasting media must be collected and disposed of in accordance with local regulations.
Integrated SL 28 HydroGommeuse
The heart of the system is the ACF SL 28. The unit features a 24-litre blasting-media vessel and a precisely adjustable blasting-media feed. The pneumatic remote control allows the system to be started and stopped directly at the operator's station. This prevents unnecessary consumption of blasting media when the operator pauses work or changes position.
The vessel is designed for fine, dry, free-flowing blasting media. The conical vessel bottom supports a consistent material flow. Dry blasting media, properly prepared compressed air and a nozzle size matched to the compressor capacity are essential for trouble-free operation.
Integrated compressor with 1,900 l/min
The petrol-powered compressor provides the compressed-air volume required for the 5 mm nozzle. Its own drive means the system does not depend on a high-voltage connection and can also be used at remote sites.
Actual blasting performance does not depend solely on the maximum pressure. The compressor's effective flow rate, nozzle condition, hose length, abrasive grain size and selected setting are all important. A worn nozzle has a larger internal diameter and can consume significantly more compressed air. The nozzle should therefore be measured regularly and replaced when excessively worn.
Compressed-air cooler for reliable abrasive flow
During compression, the compressed air heats up and contains moisture. If it cools in the hose and blasting unit, condensate may form. Damp abrasive tends to clump and can block valves, metering equipment and the nozzle.
The integrated air cooler is designed for up to 2,000 l/min and reduces the temperature of the compressed air. This allows a large proportion of the moisture to be separated before it enters the blasting unit. For reliable operation, condensate separators must be checked and drained regularly.
200-litre water tank for self-contained operation
The integrated water tank supplies the hydrogommage nozzle independently of a fixed water connection. With a capacity of 200 litres, it provides sufficient water for many typical anti-graffiti applications. The actual range depends on the nozzle setting, water addition, working time and, where applicable, use of the high-pressure cleaner.
Clean water should be used for operation. Contaminants can impair lines, valves and nozzles. During extended periods of inactivity and when there is a risk of frost, the tank, pump and lines must be completely drained.
T.A.G. + or T.A.G. + HP?
The T.A.G. + is the right solution when graffiti is to be removed primarily by aéro- or hydrogommage. The system already includes the blasting unit, compressor, compressed-air treatment and water supply.
The T.A.G. + HP expands this system with a mobile high-pressure cleaner delivering up to 165 bar and 11 l/min. It can be used independently and is suitable for rinsing off loosened residues, pre-cleaning, final cleaning and pure water-cleaning applications.
✔ T.A.G. + HP: additionally, professional high-pressure cleaning
✔ Both variants: fully mobile and designed for regular use
Suitable substrates
✔ Brick and clinker façades
✔ Concrete and mineral render
✔ Metal, steel and cast iron
✔ Wood, doors, gates and façade elements
✔ Monuments, sculptures and fountains
✔ Walls, underpasses and noise barriers
✔ Street furniture and technical installations
Suitability must always be tested on a sample area. Soft natural stone, weathered brick, old render, thin metal sheets, coated glass and sensitive wood surfaces can be damaged by incorrect settings.
Suitable abrasives
Fine mineral abrasives are generally used for graffiti removal. Hardness, grain size, grain shape and purity are decisive.
✔ Fine garnet for controlled cleaning and paint-removal work
✔ Special soft media for particularly sensitive surfaces
✔ Use only dry, free-flowing abrasives approved for the equipment
Material that is too coarse or damp can impair abrasive flow. Very hard media increase wear on the nozzle, hose and valves.
Finding the correct settings
The optimum working pressure depends on the substrate, the graffiti paint, the penetration depth and the desired result. As a general rule, begin with low pressure. Increase the pressure gradually only if the cleaning effect is insufficient.
✔ Initially set the blasting pressure low
✔ Use abrasive sparingly
✔ Guide the nozzle at a consistent distance
✔ Do not work continuously in one spot
✔ Adjust the water addition so that dust is bound without unnecessarily soaking the surface
Typical applications
✔ Schools, railway stations and stops
✔ Underpasses, bridges and retaining walls
✔ Monument conservation and restoration
✔ Façade cleaning
✔ Cleaning of street furniture
✔ Removal of old coatings and paint residues
✔ Municipal public works departments
✔ Building cleaning and renovation companies
✔ Mobile surface-cleaning service providers
Operating requirements
Safe operation requires a sufficiently large, load-bearing transport surface. The operating weight of approximately 545 kg, as well as water, abrasive, accessories and any additional equipment, must be taken into account when determining payload and securing the load.
At the job site, the work area, pedestrian and traffic protection, noise protection, and the collection of wastewater and residues must be planned. The petrol engine must not be operated in enclosed or inadequately ventilated areas. Exhaust fumes can reach life-threatening concentrations.
Occupational safety
Even dust-reduced hydrogommage does not produce a completely emission-free process. Dissolved paint, abrasive, fine dust and water mist may contain hazardous components.
✔ Hearing protection
✔ Blast suit and suitable gloves
✔ Safety shoes
✔ Securing the work area
✔ Testing old coatings for hazardous substances
✔ Proper disposal of residues and wastewater
Maintenance and care
✔ Keep the abrasive container dry
✔ Check the nozzle for wear and enlargement
✔ Check the blasting hose for abrasion, kinks and damage
✔ Clean the water lines and filters
✔ Rinse the water tank regularly
✔ Perform engine and compressor maintenance according to the manufacturer's specifications
✔ Inspect the high-pressure hose and lance of the HP version
✔ Fully drain the system if there is a risk of frost
Why the ACF T.A.G. +?
The T.A.G. + combines components that would otherwise have to be assembled and transported separately for mobile graffiti removal. The coordinated combination of the SL 28, 1,900 l/min compressor, air cooling, 200-litre water tank and Hydrogommage nozzle simplifies planning and reduces setup time.
The HP version expands the system with a second cleaning technology. This allows the operator to choose between low-pressure blasting, Hydrogommage and high-pressure cleaning, depending on the type of contamination. This makes the system particularly appealing to professional users with varying tasks.
FAQ – Frequently asked questions
Can the T.A.G. + be used without a fixed water connection?
Yes. The integrated 200-litre water tank enables largely self-contained Hydrogommage operations.
Can the blasting system be removed from the platform?
Yes. The ACF blasting unit is mobile and can be moved closer to the work area.
What is the difference between the T.A.G. + and the T.A.G. + HP?
The T.A.G. + HP additionally features an independently usable pressure washer with 165 bar and 11 l/min.
Which nozzle is included?
The manufacturer specifies a 5 mm Hydrogommage nozzle.
How long is the blasting hose?
The system is equipped with a 10-metre hose.
What compressor capacity is available?
According to the manufacturer, the integrated petrol compressor delivers 1,900 l/min.
Is the process completely dust-free?
No. Adding water significantly reduces dust generation, but does not eliminate it completely.
Can wood be treated?
Yes, provided the abrasive, pressure and distance are adjusted to the type and condition of the wood.
Is the equipment suitable for natural stone?
Yes. However, a cautious test area is required, especially on soft or historic natural stone.
Can the pressure washer be used separately?
Yes. In the HP version, it is mounted on a mobile chassis and can be used independently of the blasting system.
Why is compressed-air cooling important?
It reduces moisture in the compressed air and helps prevent clumping and disruptions in abrasive dosing.
Is the system suitable for regular commercial use?
Yes. The T.A.G. + was developed as a professional, mobile, all-in-one anti-graffiti solution for regular use.
Paiement et sécurité
Modes de paiement
Vos informations de paiement sont traitées de manière sécurisée. Nous ne stockons pas les détails de votre carte de crédit et n'avons pas accès aux informations de votre carte de crédit.
In addition, mollie offers you many other payment methods at checkout!
