{"product_id":"contracor-strahlmittel-ruckgewinnungssystem-vac-7h-mit-lagersilo-und-staubvorabscheider-cs-500-komplett-set","title":"VAC-7HS abrasive recovery system with storage silo and CS-500 pre-separator, complete set","description":"\u003ch5\u003eContracor VAC-7HS – abrasive media recovery with storage silo and CS-500 pre-separator\u003c\/h5\u003e\n\u003cp\u003eThe \u003cstrong\u003eContracor abrasive media recovery system VAC-7HS with storage silo and CS-500 pre-separator\u003c\/strong\u003e is a powerful electrically operated vacuum recovery system for collecting, cleaning and temporarily storing used abrasive media. The system was specially developed for mineral abrasive media that can generate increased dust levels and a high proportion of unusable fine particles during the blasting process.\u003c\/p\u003e\n\u003cp\u003eThe VAC-7HS combines a particularly powerful side-channel blower with a freestanding CS-500 pre-separator, an integrated cartridge filter and a separately installed storage silo with a volume of \u003cstrong\u003e0.3 m³\u003c\/strong\u003e. This separates the collected abrasive media from unusable material, filters it and then stores it in the storage silo independently of the blast pot.\u003c\/p\u003e\n\u003cp\u003eThe recovered material can be discharged from the silo in a controlled manner via the manually operated shut-off flap. Suitable abrasive media can be refilled into a blast pot. Alternatively, material that can no longer be used can be transferred to a Big-Bag filling station for orderly disposal.\u003c\/p\u003e\n\u003cp\u003eWith a drive power of \u003cstrong\u003e7.5 kW\u003c\/strong\u003e, a recovery capacity of up to \u003cstrong\u003e3.5 tonnes per hour\u003c\/strong\u003e and a maximum suction hose length of \u003cstrong\u003e10 metres\u003c\/strong\u003e, the VAC-7HS is suitable for professional stationary blast rooms with increased requirements for dust separation, material storage and flexible further processing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003eYour benefits at a glance\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e✅ Specially developed for mineral abrasive media that generate higher levels of dust\u003c\/li\u003e\n\u003cli\u003e✅ Freestanding CS-500 pre-separator\u003c\/li\u003e\n\u003cli\u003e✅ Freestanding storage silo with a volume of 0.3 m³\u003c\/li\u003e\n\u003cli\u003e✅ High-performance side-channel blower with 7.5 kW\u003c\/li\u003e\n\u003cli\u003e✅ Recovery capacity of up to 3.5 tonnes per hour\u003c\/li\u003e\n\u003cli\u003e✅ Separation of reusable and unusable abrasive media\u003c\/li\u003e\n\u003cli\u003e✅ Central interim storage of recovered material\u003c\/li\u003e\n\u003cli\u003e✅ Manually controlled material discharge via shut-off flap\u003c\/li\u003e\n\u003cli\u003e✅ Blast pot refilling possible\u003c\/li\u003e\n\u003cli\u003e✅ Can be used as an alternative to filling a Big-Bag station\u003c\/li\u003e\n\u003cli\u003e✅ Integrated high-performance cartridge filter\u003c\/li\u003e\n\u003cli\u003e✅ Automatic pulse-jet cleaning of the filter element\u003c\/li\u003e\n\u003cli\u003e✅ Reduced load on the main filter through pre-separation\u003c\/li\u003e\n\u003cli\u003e✅ Lower consumption of new abrasive media\u003c\/li\u003e\n\u003cli\u003e✅ Reduced cleaning and disposal effort\u003c\/li\u003e\n\u003cli\u003e✅ Flexible installation independent of the blast pot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch5\u003e📦 Scope of delivery\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eContracor VAC-7HS vacuum abrasive media recovery system\u003c\/li\u003e\n\u003cli\u003eElectric side-channel blower with 7.5 kW\u003c\/li\u003e\n\u003cli\u003eFreestanding CS-500 pre-separator\u003c\/li\u003e\n\u003cli\u003eManual emptying of the pre-separator\u003c\/li\u003e\n\u003cli\u003eFreestanding abrasive media storage silo with a volume of 0.3 m³\u003c\/li\u003e\n\u003cli\u003eManually operated shut-off flap on the storage silo\u003c\/li\u003e\n\u003cli\u003eIntegrated high-performance cartridge filter\u003c\/li\u003e\n\u003cli\u003eAutomatic pulse-jet filter cleaning\u003c\/li\u003e\n\u003cli\u003eFloor hopper with grating\u003c\/li\u003e\n\u003cli\u003e5 m abrasion-resistant rubber suction hose\u003c\/li\u003e\n\u003cli\u003eSuction hose inner diameter 63.5 mm (2½\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"background: #f5f5f5; border-radius: 10px; padding: 15px; margin: 20px 0;\"\u003e\n\u003cstrong\u003e💡 Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eA blast pot and a suitable Big-Bag holder are not included in the scope of delivery. Material is discharged from the storage silo manually via the integrated shut-off valve.\u003c\/div\u003e\n\u003chr\u003e\n\u003ch5\u003eTechnical data\u003c\/h5\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; min-width: 700px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #4f4f4f; color: #ffffff;\"\u003e\n\u003cth style=\"padding: 10px; text-align: left;\"\u003eFeature\u003c\/th\u003e\n\u003cth style=\"padding: 10px; text-align: left;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eVAC-7HS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eStationary vacuum abrasive recovery system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eWith storage silo and CS-500 pre-separator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eRecommended abrasives\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eReusable mineral abrasives\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eSilo volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003e0.3 m³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eMaterial discharge\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eManually via shut-off flap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eRefilling a blast pot or filling Big Bags\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eDrive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eElectric side-channel blower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eRated voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003e3~ 380–420 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003edrive power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003e7.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003erecovery capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eup to 3.5 t\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eMaximum suction hose length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003e10 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eIncluded suction hose length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eSuction hose inner diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003e63.5 mm (2½\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eSuction hose material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eAbrasion-resistant rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eMaximum abrasive grain size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eUp to G40, approx. 0.30–0.80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eDust pre-separator\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eCS-500, freestanding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003ePre-separator dust discharge\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eFilter type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eCartridge filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eFilter area\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003e7.5 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eFilter medium\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003ePolyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eFilter cleaning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003eAutomatic pulse-jet cleaning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eSound pressure level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003e72 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px;\"\u003e565 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch5\u003eDimensions (mm)\u003c\/h5\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0876\/8526\/7803\/files\/abmessungen-strahlmittel-rueckgewinnungssystem-vac-7-hs-contracor-10300510.jpg?v=1784808589\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003eSpecially designed for mineral abrasives\u003c\/h5\u003e\n\u003cp\u003eMineral abrasives can generate high levels of dust, abrasion, and broken grains during the blasting process. These fine particles should be separated as reliably as possible from the still-usable abrasive before the material is reused or stored.\u003c\/p\u003e\n\u003cp\u003eThe VAC-7HS was specially developed for these applications. The upstream CS-500 performs an initial separation of reusable abrasive from unusable components before the material flow reaches the recovery unit and the storage silo.\u003c\/p\u003e\n\u003cp\u003eThis makes the system particularly suitable for blasting halls where mineral media are used and increased dust contamination within the material circuit is to be expected.\u003c\/p\u003e\n\u003cdiv style=\"background: #f5f5f5; border-radius: 10px; padding: 15px; margin: 20px 0;\"\u003e\n\u003cstrong\u003e🎯 The difference compared with the VAC-7H:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe VAC-7HS also features the freestanding CS-500 pre-separator. This makes the system particularly suitable for mineral abrasives and abrasives that generate higher dust levels.\u003c\/div\u003e\n\u003chr\u003e\n\u003ch5\u003eMulti-stage recovery process\u003c\/h5\u003e\n\u003cp\u003eThe used abrasive is first swept or shoveled into the floor hopper. From there, the powerful side-channel blower draws the material through the abrasion-resistant rubber suction hose.\u003c\/p\u003e\n\u003cp\u003eThe material flow first reaches the freestanding CS-500 pre-separator. There, reusable abrasive is separated from dust, fines, and unusable material.\u003c\/p\u003e\n\u003cp\u003eThe recovered abrasive is then transported to the main unit and into the freestanding 0.3 m³ storage silo. Fine dust particles remaining in the airflow are separated in the integrated cartridge filter.\u003c\/p\u003e\n\u003cp\u003eThe material remains in the storage silo until it is fed via the manually operated shut-off valve to a blast pot, another material container, or a Big-Bag station.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003eFreestanding CS-500 pre-separator\u003c\/h5\u003e\n\u003cp\u003eThe CS-500 is located in the material flow upstream of the actual recovery and filtration unit. It performs initial separation of dust, broken abrasive grains and other lighter components.\u003c\/p\u003e\n\u003cp\u003eThis reduces the dust load on downstream components. At the same time, a smaller proportion of unusable fine particles enters the storage silo.\u003c\/p\u003e\n\u003cp\u003eThe material separated in the CS-500 is collected in a separate area and emptied manually. The required emptying intervals depend on the type of abrasive media, the amount of dust generated and the daily operating time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e✅ Pre-separation of coarse dust and fine particles\u003c\/li\u003e\n\u003cli\u003e✅ Separation of usable and unusable material\u003c\/li\u003e\n\u003cli\u003e✅ Reduced load on the integrated cartridge filter\u003c\/li\u003e\n\u003cli\u003e✅ Improved quality of the stored abrasive media\u003c\/li\u003e\n\u003cli\u003e✅ Separate collection area with manual emptying\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch5\u003eFreestanding storage silo with a volume of 0.3 m³\u003c\/h5\u003e\n\u003cp\u003eThe VAC-7HS features a separately installed abrasive-media storage silo with a volume of \u003cstrong\u003e0.3 m³\u003c\/strong\u003e. This means that the recovered material is not automatically fed to a single blast pot but is first collected centrally.\u003c\/p\u003e\n\u003cp\u003eThe operator can temporarily store and inspect the material in the silo and then decide whether it should be reused or disposed of. The freestanding design allows flexible integration into existing blast rooms and is not directly tied to a specific blast pot.\u003c\/p\u003e\n\u003cp\u003eThe actual quantity of material that can be stored in the silo depends on the bulk density of the abrasive media used.\u003c\/p\u003e\n\u003cdiv style=\"background: #f5f5f5; border-radius: 10px; padding: 15px; margin: 20px 0;\"\u003e\n\u003cstrong\u003e💡 Flexible temporary storage:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe storage silo allows the recovered material to be processed separately from the blasting process in terms of both time and location.\u003c\/div\u003e\n\u003chr\u003e\n\u003ch5\u003eReuse or big-bag filling\u003c\/h5\u003e\n\u003cp\u003eThe VAC-7HS can be used universally for reusing suitable abrasive media or for orderly disposal of media that can no longer be used.\u003c\/p\u003e\n\u003cp\u003eFor reuse, a suitable blast pot or material container is positioned below the discharge point. After opening the manual shut-off valve, the abrasive media flows out of the storage silo by gravity.\u003c\/p\u003e\n\u003cp\u003eIf the material is to be disposed of, a suitable big-bag filling station can be installed below the discharge point. This allows the recovered abrasive media to be collected in a controlled manner and prepared for removal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e✅ Controlled discharge into a blast pot\u003c\/li\u003e\n\u003cli\u003e✅ Flexible use with different material containers\u003c\/li\u003e\n\u003cli\u003e✅ Big-bag filling for disposal possible\u003c\/li\u003e\n\u003cli\u003e✅ Material can be processed independently of time\u003c\/li\u003e\n\u003cli\u003e✅ Central collection of recovered abrasive media\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch5\u003eManual material discharge via shut-off valve\u003c\/h5\u003e\n\u003cp\u003eThe material stored in the 0.3 m³ silo is discharged via a manually operated shut-off valve. This allows the operator to determine when and how much material is discharged.\u003c\/p\u003e\n\u003cp\u003eThe manual design enables simple and controlled operation. At the same time, the closed flap prevents the silo from being emptied unintentionally.\u003c\/p\u003e\n\u003cp\u003eBefore opening, ensure that the designated blast pot, material container, or Big Bag is correctly positioned and secured against slipping.\u003c\/p\u003e\n\u003cdiv style=\"background: #f5f5f5; border-radius: 10px; padding: 15px; margin: 20px 0;\"\u003e\n\u003cstrong\u003e📌 Important note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe VAC-7HS does not automatically refill a blast pot. Material is discharged manually via the shut-off flap of the storage silo.\u003c\/div\u003e\n\u003chr\u003e\n\u003ch5\u003eHigh-performance side-channel blower\u003c\/h5\u003e\n\u003cp\u003eThe VAC-7HS is equipped with an electric side-channel blower with a rated drive power of \u003cstrong\u003e7.5 kW\u003c\/strong\u003e. It generates the negative pressure required for pneumatic material conveying.\u003c\/p\u003e\n\u003cp\u003eThe used abrasive is transported through the suction line to the CS-500 and then to the recovery unit or storage silo.\u003c\/p\u003e\n\u003cp\u003eThe actual conveying capacity depends on the type of abrasive, grain shape, bulk density, moisture, degree of contamination, hose length, and hose routing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003eIntegrated cartridge filter with pulse-jet cleaning\u003c\/h5\u003e\n\u003cp\u003eThe VAC-7HS features an integrated high-performance cartridge filter with a filter area of \u003cstrong\u003e7.5 m²\u003c\/strong\u003e. The polyester filter medium retains fine dust particles from the conveyed airstream.\u003c\/p\u003e\n\u003cp\u003eAutomatic pulse-jet cleaning cleans the filter cartridge with short compressed-air pulses. This loosens adhering dust from the filter surface, helping to keep airflow and suction performance as constant as possible.\u003c\/p\u003e\n\u003cp\u003eThe upstream CS-500 reduces the amount of dust reaching the cartridge filter. This relieves the filter element and can improve its service life compared with a system without pre-separation.\u003c\/p\u003e\n\u003cp\u003eDespite automatic cleaning, the cartridge filter must be inspected regularly and replaced as needed, depending on dust exposure and operating time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003eUp to 3.5 tonnes of recovery capacity per hour\u003c\/h5\u003e\n\u003cp\u003eThe VAC-7HS achieves a recovery capacity of up to \u003cstrong\u003e3.5 tonnes per hour\u003c\/strong\u003e. This makes the system suitable for professional stationary blast rooms with a regular volume of mineral abrasives.\u003c\/p\u003e\n\u003cp\u003eThe maximum intended suction hose length is \u003cstrong\u003e10 meters\u003c\/strong\u003e. The complete set is supplied with a \u003cstrong\u003e5-meter abrasion-resistant rubber suction hose\u003c\/strong\u003e with an inner diameter of \u003cstrong\u003e63.5 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe specified performance may vary with other abrasives due to differences in specific gravity, grain shape, moisture, and flow characteristics. Hose bends, reductions in cross-section, and differences in elevation also affect conveying capacity.\u003c\/p\u003e\n\u003cdiv style=\"background: #f5f5f5; border-radius: 10px; padding: 15px; margin: 20px 0;\"\u003e\n\u003cstrong\u003e📌 Planning note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe suction line should be installed as short and straight as possible, without unnecessary bends. Increased flow resistance can reduce recovery performance.\u003c\/div\u003e\n\u003chr\u003e\n\u003ch5\u003eEconomical blasting media processing\u003c\/h5\u003e\n\u003cp\u003eEven with mineral blasting media, a technically usable material fraction may remain after the blasting process. Without recovery, this fraction is often disposed of together with dust and unusable material.\u003c\/p\u003e\n\u003cp\u003eThe VAC-7HS separates the reusable material fraction in the CS-500 and collects it in the freestanding storage silo. The operator can then decide whether to reuse the material or send it for disposal.\u003c\/p\u003e\n\u003cp\u003eThis reduces the need for new blasting media, manual cleaning effort, internal material transport, and disposal volume.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e✅ Reduced need for new blasting media\u003c\/li\u003e\n\u003cli\u003e✅ Reuse of suitable mineral blasting media fractions\u003c\/li\u003e\n\u003cli\u003e✅ Reduced disposal volume\u003c\/li\u003e\n\u003cli\u003e✅ Centralized and controlled material storage\u003c\/li\u003e\n\u003cli\u003e✅ Less manual material handling\u003c\/li\u003e\n\u003cli\u003e✅ Reduced cleaning effort in the blasting area\u003c\/li\u003e\n\u003cli\u003e✅ Flexible choice between reuse and disposal\u003c\/li\u003e\n\u003cli\u003e✅ Relieves the main filter through the CS-500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch5\u003eFloor hopper with grating\u003c\/h5\u003e\n\u003cp\u003eThe floor hopper included in the complete set serves as the central collection point for used blasting media. Material lying on the workshop floor is swept or shoveled into the hopper and then extracted by the vacuum unit.\u003c\/p\u003e\n\u003cp\u003eThe integrated grating retains larger foreign objects before they can enter the suction line. This protects the suction hose, dust pre-separator, filter unit, and storage silo from coarse contaminants.\u003c\/p\u003e\n\u003cp\u003eThe floor hopper enables the retrofitting of a stationary recovery system without requiring the installation of a complete automatic floor conveying system.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003eSuitable blasting media\u003c\/h5\u003e\n\u003cp\u003eThe VAC-7HS was specially developed for reusable mineral blasting media. Whether a particular material is suitable for multiple blasting cycles depends on grain stability, contamination, and its condition after the blasting process.\u003c\/p\u003e\n\u003cp\u003eAs a technical size reference, the manufacturer specifies a maximum grain size of \u003cstrong\u003eG40 or approximately 0.30 to 0.80 mm\u003c\/strong\u003e. Actual suitability also depends on grain shape, bulk density, moisture, and flow behavior.\u003c\/p\u003e\n\u003cp\u003eThe material used should be dry and sufficiently free-flowing. Damp, clumped, or heavily contaminated blasting media can reduce suction performance and block material paths.\u003c\/p\u003e\n\u003cdiv style=\"background: #f5f5f5; border-radius: 10px; padding: 15px; margin: 20px 0;\"\u003e\n\u003cstrong\u003e⚠️ Check blasting media suitability:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNot every mineral blasting medium is suitable for repeated reuse. Highly friable disposable blasting media can only be recovered economically to a limited extent, even with pre-separation.\u003c\/div\u003e\n\u003chr\u003e\n\u003ch5\u003eOptional handheld suction tube\u003c\/h5\u003e\n\u003cp\u003eFor flexible collection of blasting media from larger floor areas, an optional handheld suction tube with support wheels and a handle is available. The accessory is supplied with a 10-meter PU suction hose.\u003c\/p\u003e\n\u003cp\u003eThe hand suction tube enables targeted collection of loose material in areas that cannot be reached directly via the stationary bottom hopper.\u003c\/p\u003e\n\u003cp\u003eThe support wheels make it easier to guide the suction tube and reduce physical effort. The hand suction tube is not included as standard with the VAC-7HS complete set.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003e🔧 Areas of application\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eStationary sandblasting halls\u003c\/li\u003e\n\u003cli\u003eBlast rooms using mineral abrasives\u003c\/li\u003e\n\u003cli\u003eApplications with increased dust generation\u003c\/li\u003e\n\u003cli\u003eCentral abrasive collection\u003c\/li\u003e\n\u003cli\u003eIntermediate storage of recovered abrasive\u003c\/li\u003e\n\u003cli\u003eFilling various blast pots\u003c\/li\u003e\n\u003cli\u003eBig Bag filling stations\u003c\/li\u003e\n\u003cli\u003eSteel and metal construction\u003c\/li\u003e\n\u003cli\u003eTank and system construction\u003c\/li\u003e\n\u003cli\u003eMechanical engineering\u003c\/li\u003e\n\u003cli\u003eVehicle and commercial vehicle manufacturing\u003c\/li\u003e\n\u003cli\u003eRail vehicle manufacturing\u003c\/li\u003e\n\u003cli\u003eShipyards and marine maintenance\u003c\/li\u003e\n\u003cli\u003eSurface preparation before coating and painting\u003c\/li\u003e\n\u003cli\u003eRemoval of rust, mill scale and old coatings\u003c\/li\u003e\n\u003cli\u003eRetrofitting existing stationary blasting systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch5\u003eOperating requirements\u003c\/h5\u003e\n\u003cp\u003eOperation of the VAC-7HS requires a suitable three-phase power connection with \u003cstrong\u003e3~ 380–420 V \/ 50 Hz\u003c\/strong\u003e. A suitable compressed-air supply is also required for the automatic pulse-jet cleaning of the filter cartridge.\u003c\/p\u003e\n\u003cp\u003eThe system must be installed on a level surface with sufficient load-bearing capacity. The system weight of approximately \u003cstrong\u003e565 kg\u003c\/strong\u003e, as well as the additional weight of the abrasive stored in the silo, must be taken into account during planning.\u003c\/p\u003e\n\u003cp\u003eSuitable routing for lines must be provided between the bottom hopper, CS-500, recovery unit and storage silo. The components must remain easily accessible for operation, maintenance and cleaning.\u003c\/p\u003e\n\u003cp\u003eThere must be sufficient space below the silo outlet for a blast pot, material container or suitable Big Bag holder.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003eMaintenance and care\u003c\/h5\u003e\n\u003cp\u003eRegular maintenance is essential for consistently high suction, separation and recovery performance. The CS-500, filter cartridge, pulse-jet cleaning system, suction hoses and storage silo in particular must be checked regularly.\u003c\/p\u003e\n\u003cp\u003eThe dust pre-separator must be emptied manually depending on the amount of material accumulated. Emptying it too late can impair separation performance and place greater strain on downstream components.\u003c\/p\u003e\n\u003cp\u003eThe storage silo and shut-off valve must also be checked for deposits, wear and proper operation. The valve must close reliably and be safe to operate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmpty the CS-500 dust pre-separator regularly\u003c\/li\u003e\n\u003cli\u003eCheck the separation area for deposits\u003c\/li\u003e\n\u003cli\u003eCheck the filter cartridge regularly\u003c\/li\u003e\n\u003cli\u003eCheck the operation of the pulse-jet cleaning system\u003c\/li\u003e\n\u003cli\u003eInspect suction hoses for abrasion and leaks\u003c\/li\u003e\n\u003cli\u003eClean the bottom hopper and grating\u003c\/li\u003e\n\u003cli\u003eCheck the storage silo for deposits\u003c\/li\u003e\n\u003cli\u003eCheck the shut-off valve for proper operation and leaks\u003c\/li\u003e\n\u003cli\u003eKeep material pathways free of foreign objects\u003c\/li\u003e\n\u003cli\u003eHave electrical components serviced by qualified personnel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch5\u003eVAC-7H or VAC-7HS?\u003c\/h5\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; min-width: 750px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #4f4f4f; color: #ffffff;\"\u003e\n\u003cth style=\"padding: 10px; text-align: left;\"\u003eFeature\u003c\/th\u003e\n\u003cth style=\"padding: 10px; text-align: center;\"\u003eVAC-7H\u003c\/th\u003e\n\u003cth style=\"padding: 10px; text-align: center;\"\u003eVAC-7HS\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003edrive power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003e7.5 kW\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003e7.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003estorage silo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003e0.3 m³\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003e0.3 m³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eDust pre-separator\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eCS-500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003erecovery capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eup to 4.0 t\/h\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eup to 3.5 t\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eMaterial discharge\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eManual\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eRecommended use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eUniversal abrasive recovery\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eMineral and more dust-intensive abrasives\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003e525 kg\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003e565 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe VAC-7H is the right solution for universal recovery and intermediate storage of suitable abrasives. The VAC-7HS additionally features the CS-500 dust pre-separator and is therefore particularly recommended for mineral media with increased dust generation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003eVAC-7S or VAC-7HS?\u003c\/h5\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; min-width: 750px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #4f4f4f; color: #ffffff;\"\u003e\n\u003cth style=\"padding: 10px; text-align: left;\"\u003eFeature\u003c\/th\u003e\n\u003cth style=\"padding: 10px; text-align: center;\"\u003eVAC-7S\u003c\/th\u003e\n\u003cth style=\"padding: 10px; text-align: center;\"\u003eVAC-7HS\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eDust pre-separator\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eCS-500\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eCS-500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eMaterial container\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eStorage container mounted directly on the blast pot\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eFreestanding 0.3 m³ storage silo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eCascade cleaner\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eRefilling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eAutomatic\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eManually via shut-off flap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f7f7f7;\"\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eBig-bag filling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eNot intended\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003ePossible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px;\"\u003e\u003cstrong\u003eRecommended use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eAutomatic abrasive circuit at the Z-200\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; text-align: center;\"\u003eFlexible storage, reuse, or disposal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe VAC-7S is suitable for an automatic recovery circuit with direct refilling of a Contracor Z-200 blast pot. The VAC-7HS, by contrast, offers a freestanding storage silo and enables flexible, manually controlled reuse or disposal of the material.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003eWhy choose the Contracor VAC-7HS?\u003c\/h5\u003e\n\u003cp\u003eThe Contracor VAC-7HS is a flexible complete solution for stationary blast rooms where mineral abrasives with increased dust generation are to be recovered, pre-cleaned, and stored independently of the blast pot.\u003c\/p\u003e\n\u003cp\u003eThe powerful 7.5 kW side-channel blower handles pneumatic material conveying. The freestanding CS-500 separates dust and unusable fine particles, while the integrated cartridge filter performs fine separation of the airflow.\u003c\/p\u003e\n\u003cp\u003eThe cleaned material is collected in the 0.3 m³ storage silo and can then be dispensed in a controlled manner for reuse or disposal.\u003c\/p\u003e\n\u003cp\u003eThis enables the VAC-7HS to combine powerful abrasive recovery with improved dust separation, flexible intermediate storage, and versatile options for further material processing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003eFAQ – Frequently Asked Questions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the function of the VAC-7HS?\u003c\/strong\u003e\u003cbr\u003eThe system extracts used abrasive, separates usable material from dust and unusable components, and collects it in a freestanding storage silo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich abrasives was the VAC-7HS developed for?\u003c\/strong\u003e\u003cbr\u003eThe system was specially developed for reusable mineral abrasives that generate increased amounts of dust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the VAC-7HS and the VAC-7H?\u003c\/strong\u003e\u003cbr\u003eThe VAC-7HS additionally features the freestanding CS-500 dust pre-separator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the VAC-7HS and the VAC-7S?\u003c\/strong\u003e\u003cbr\u003eThe VAC-7S has a storage container mounted directly on the blast pot with automatic refilling. The VAC-7HS features a freestanding storage silo with manual material discharge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the capacity of the storage silo?\u003c\/strong\u003e\u003cbr\u003eThe freestanding storage silo has a volume of 0.3 m³.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the function of the CS-500?\u003c\/strong\u003e\u003cbr\u003eThe CS-500 separates dust, fine particles, and unusable components from the recovered abrasive and thereby reduces the load on the main filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the CS-500 emptied?\u003c\/strong\u003e\u003cbr\u003eThe pre-separator is emptied manually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a blast pot refilled automatically?\u003c\/strong\u003e\u003cbr\u003eNo. Material is discharged manually via the shut-off flap of the storage silo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the material be reused?\u003c\/strong\u003e\u003cbr\u003eYes. Suitable blasting media can be discharged from the storage silo in a controlled manner into a blast pot or material container.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the VAC-7HS be used for disposal?\u003c\/strong\u003e\u003cbr\u003eYes. Material that can no longer be used can be discharged from the storage silo into a suitable Big-Bag station.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a Big-Bag station included in the scope of delivery?\u003c\/strong\u003e\u003cbr\u003eNo. A suitable Big-Bag frame or filling station must be provided separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a blast pot included in the scope of delivery?\u003c\/strong\u003e\u003cbr\u003eNo. A blast pot is not included in the scope of delivery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the recovery capacity?\u003c\/strong\u003e\u003cbr\u003eAccording to the manufacturer, the maximum recovery capacity is up to 3.5 tonnes per hour.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum permitted suction hose length?\u003c\/strong\u003e\u003cbr\u003eThe maximum specified suction hose length is 10 meters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much suction hose is included in the complete set?\u003c\/strong\u003e\u003cbr\u003eThe complete set includes 5 meters of abrasion-resistant rubber suction hose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the internal diameter of the suction hose?\u003c\/strong\u003e\u003cbr\u003eThe internal diameter is 63.5 mm or 2½ inches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum grain size that can be processed?\u003c\/strong\u003e\u003cbr\u003eAs a technical reference, the manufacturer specifies a maximum grain size up to G40, equivalent to approximately 0.30–0.80 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan every mineral blasting medium be reused?\u003c\/strong\u003e\u003cbr\u003eNo. Reusability depends on the material type, grain stability, contamination and condition after the blasting process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the blasting media collected?\u003c\/strong\u003e\u003cbr\u003eThe used material is placed in the floor hopper with a broom or shovel and then extracted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cartridge filter cleaned?\u003c\/strong\u003e\u003cbr\u003eThe filter cartridge is cleaned automatically by short compressed-air pulses from the Pulse-Jet cleaning system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the VAC-7HS require compressed air?\u003c\/strong\u003e\u003cbr\u003eYes. A suitable compressed-air supply is required for automatic Pulse-Jet filter cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat electrical power supply is required?\u003c\/strong\u003e\u003cbr\u003eA three-phase power connection with 3~ 380–420 V \/ 50 Hz is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the drive power?\u003c\/strong\u003e\u003cbr\u003eThe electric side-channel blower has a drive power of 7.5 kW.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow loud is the VAC-7HS?\u003c\/strong\u003e\u003cbr\u003eThe sound pressure level specified by the manufacturer is 72 dB(A).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow heavy is the system?\u003c\/strong\u003e\u003cbr\u003eThe specified system weight is approximately 565 kg. The weight of the stored blasting media must be added.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a manual suction tube included in the scope of delivery?\u003c\/strong\u003e\u003cbr\u003eNo. A manually operated suction tube with support wheels, handle and 10-meter PU suction hose is available as an optional accessory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the VAC-7HS be retrofitted in an existing blast room?\u003c\/strong\u003e\u003cbr\u003eYes. The freestanding system concept is particularly suitable for retrofitting existing blast rooms with individual material flow paths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the VAC-7HS worthwhile?\u003c\/strong\u003e\u003cbr\u003eThe system combines the recovery of mineral blasting media with additional pre-separation of dust and flexible intermediate storage. This allows the material to be reused or disposed of in a controlled manner.\u003c\/p\u003e","brand":"Contracor","offers":[{"title":"Default Title","offer_id":49033996763483,"sku":"10300510","price":5169900.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/8526\/7803\/files\/strahlmittel-rueckgewinnungssystem-vac-7-hs-contracor-10300510.jpg?v=1726585527","url":"https:\/\/ae6ea8-95.myshopify.com\/en-hu\/products\/contracor-strahlmittel-ruckgewinnungssystem-vac-7h-mit-lagersilo-und-staubvorabscheider-cs-500-komplett-set","provider":"ABS Strahltechnik","version":"1.0","type":"link"}